Express tests for determining the residual amount of β-lactams, tetracyclines, chloramphenicol, streptomycins in milk, whey

10.04.2025
27.1K

The kit is used for the determination of β-lactams, tetracyclines, chloramphenicol and streptomycins (penicillin G, cloxacillin, amoxicillin, oxacillin, nafcillin, ampicillin, dicloxacillin, benzathine, cefkinome, cephalonium, ceftiofur, cefapirin, cefoperazone, cefacetril, cefazolin, tetracycline, doxytetracycline , chlortetracycline, chloramphenicol, streptomycin, dihydrostreptomycin) in raw, pasteurized, sterilized, reconstituted MILK powder, whey, reconstituted whey powder. Limit of detection of the test kit:

 

  • PRODUCTS OF ANIMAL ORIGIN. Method for detecting residual amounts of beta-lactams, tetracyclines, chloramphenicol and streptomycins in milk, whey using test kits "pioneer MEIZHENG BIO-TECH (4 in 1) JC0208

 

Test kit detection limit:

β-lactams

Limit of detection  ppb (µg/L)

 

Cephalosporins

Limit of detection  ppb (µg/L)

 

Penicillin G

1-2

Cefkin

5-7

Cloxacillin

3-6

Cephalonium

3-5

Amoxicillin

2-3

Ceftiofur

70-90

Oxacillin

5-7

Cefapirin

4-8

Nafcillin

7-10

Cefoperazone

3-5

Ampicillin

2-3

Cefacetril

15-20

Dicloxacillin

3-6

Cefazolin

20-30

benzathine

3-5

---

---

Tetracyclines

Limit of detection  ppb (µg/L)

 

Tetracyclines

Limit of detection  ppb (µg/L)

 

Tetracycline

7-10 _

Doxycycline

7-10

Chlortetracycline

7-10

Oxytetracycline

7-10

Other antibiotics

Limit of detection  ppb (µg/L)

 

Other antibiotics

Limit of detection  ppb (µg/L)

 

Streptomycin

50

Dihydrostreptomycin

50

Chloramphenicol

0.2 - 0.3

--

--

 

 

Set composition:

 

  • The kit includes everything you need for 96 definitions:
  • 12 tubes, each containing 1 strip with 8 wells with a reagent containing antibodies and 8 test strips;
  • 100 disposable Pasteur pipettes;
  • Instruction;
  • 8 wells with control reagent - Positive standard (antibiotic concentration is indicated on the packaging of the positive control and on the certificate of quality that comes with each lot of test kits);
  • 8 wells with control reagent - Negative standard (does not contain antibiotics);
  • 1 well plate.

 

Sample preparation of milk and whey samples:
 
Powdered milk, powdered milk whey: Dissolve the sample in a suitable flask with warm distilled water (according to the current regulatory documentation), mix thoroughly.
 
Milk , reconstituted milk powder, reconstituted whey powder: Samples must be liquid and homogeneous. Samples should be free of clots and product separation phases. The temperature of the sample must be at least 4°C, neither frozen nor heated. Mix the sample thoroughly before testing.
 
 
The analysis can be carried out with or without an incubator.
 
        ◦ If using an incubator, place the sample well in a preheated 40°C incubator, pipette a 200 µl milk or whey sample and transfer to the reagent well from the kit. Thoroughly mix the sample with the reagent with a tenfold set and drain the liquid with a pipette in the well until a uniform pink color is obtained and incubate the mixture for 5 minutes.
Then place the test strip from the kit into the well with the reagent and sample and incubate in the incubator for another 5 minutes at 40°C.
 
        ◦ If an incubator is not available, the assay can be performed indoors at 16-25°C. Place the sample well in the well plate, pipette a 200 µl milk or whey sample and transfer to the well with the reagent from the kit. Thoroughly mix the sample with the reagent tenfold and drain the liquid with a pipette in the well until a uniform pink color is obtained. Incubate the mixture for 5 minutes.
Then place the test strip from the kit into the well with the reagent and sample and incubate in the incubator for another 5 minutes.
 
After incubation, remove the test strip from the reagent and sample well and interpret the result within 15 minutes. To save the result, remove both filters from both ends of the test strip.

Attached Files

Read together with it: